Most WDT tools are a handle with needles pushed into it — you stir, the wrist does the work, and no two shots get the same pattern. IKAPE put a one-way bearing between the screw rod and the head instead: press the top, twist once, and the head carries itself through a full 360° on a 1.58 mm needle grid. The body is machined aluminium at 430 g, which is heavy enough to sit on the basket without being held; ten magnets in the base keep it centred while it turns. Depth adjusts to the dose. This is the premium end of the range — the bearing and the machining are what the extra costs.
$74.06
Variant
Select variants and quantity, then add them to your quote list. Price, stock, lead time and shipping are confirmed before the order.
One-way bearing: one press and twist gives a full 360°
430 g aluminium, sits on the basket unaided
10 magnets hold the rim
Adjustable depth for 51, 54 and 58 mm baskets
Product details
Supplier photographs of the product itself, the parts that decide how it works and the details a specification table cannot show.
01
A bearing does the stirring
Fourteen 0.25 mm needles on a 1.58 mm grid, sitting on a one-way bearing rather than on a fixed handle. Press the top and twist once and the head carries itself through a full turn — which is why the pattern is the same on the first shot of the morning and the last of the night. This is the part the cheaper needle tools do not have.
02
One press, one twist, a full turn
The screw rod feeds the bearing rather than the needles, which is why a single press-and-twist gets 360° out of it. No pumping, no dragging the tool through the bed, nothing to learn.
03
Depth to suit the basket
Dose size changes how deep the needles should reach — a 14 g basket and a 20 g basket do not want the same setting. The depth adjusts so the needle tips stop where the bed does.
04
Ten magnets hold the rim
The base carries ten magnets, so the tool seats on the basket instead of hovering over it. That is what keeps the spin centred: if the body shifts, the pattern shifts with it.
05
0.25 mm needles against clumps
The comparison the supplier photographs is a standard needle tool beside this one: the thinner needles break the same clump into more pieces, which is the whole point of the WDT step before tamping.
06
Machined aluminium, 430 g
A machined aluminium body with a knurled skirt and a printed badge. 430 g is heavy enough to sit on the basket without being held and light enough to lift off one-handed — on a tool at this price the mass is part of what you are buying.
Specifications8 of 8 dimensions carry a verified value.
PricePer unit, ex-works. Freight quoted separately.
$74.06
Product typeWhere the model is designed to be used
A slim WDT stirrer with 304 stainless needles and a solid wood handle that doubles as the cap — 12 cm tall, two finishes.
$6.58
For your business
Ordering in larger quantities?
Listed prices guide small-quantity enquiries. For wholesale volumes, request a quotation; we confirm price, stock, lead time, shipping and payment instructions before the order.
A filter machine with the grinder built into the top: fill the hopper, press one button, and it grinds, brews and then holds the carafe at 75 °C for two hours.
A 1350 W, 20 bar espresso machine with the grinder built into the left tower: a 0-30 grind dial, a 1.2 L water tank, a colour LED touch screen with one-touch espresso, Americano, espresso cool, single grind and steam, plus a steam wand for milk. Stainless body, 305 × 215 × 284 mm, two cups at a time.
A 700 W countertop machine that brews Turkish coffee on its own: thirteen programmes on an English touch panel, four cups per cycle, a temperature-controlled heater, an overflow sensor that cuts the brew before it climbs over the rim, and a self-cleaning cycle afterwards. 200 × 276 × 302 mm, so it goes on a hotel-room shelf as easily as on a kitchen counter.
